table of contents
        
      
      
    | libnet-macros.h(3) | libnet | libnet-macros.h(3) | 
NAME¶
libnet-macros.h -
libnet macros and symbolic constants
SYNOPSIS¶
Defines¶
#define LIBNET_DONT_RESOLVE 0
  
  #define LIBNET_RESOLVE 1
  
  #define LIBNET_ON 0
  
  #define LIBNET_OFF 1
  
  #define IN6ADDR_ERROR_INIT
  
  #define LIBNET_PR2 0
  
  #define LIBNET_PR8 1
  
  #define LIBNET_PR16 2
  
  #define LIBNET_PRu16 3
  
  #define LIBNET_PR32 4
  
  #define LIBNET_PRu32 5
  
  #define LIBNET_PRAND_MAX 0xffffffff
  
  #define LIBNET_MAX_PACKET 0xffff
  
  #define IP_MAXPACKET 0xffff
  
  #define ETHER_ADDR_LEN 0x6
  
  #define FDDI_ADDR_LEN 0x6
  
  #define TOKEN_RING_ADDR_LEN 0x6
  
  #define LIBNET_ORG_CODE_SIZE 0x3
  
  #define LIBNET_ERRBUF_SIZE 0x100
  
  #define LIBNET_MAXOPTION_SIZE 0x28
  
  #define FIX(n) (n)
  
  #define UNFIX(n) (n)
  
  #define LIBNET_DO_PAYLOAD(l, p)
  
  #define LIBNET_CKSUM_CARRY(x) (x = (x >> 16) + (x & 0xffff),
    (~(x + (x >> 16)) & 0xffff))
  
  #define LIBNET_OSPF_AUTHCPY(x, y) memcpy((uint8_t *)x, (uint8_t *)y,
    sizeof(y))
  
  #define LIBNET_OSPF_CKSUMBUF(x, y) memcpy((uint8_t *)x, (uint8_t *)y,
    sizeof(y))
  
  #define LIBNET_NTP_DO_LI_VN_MODE(li, vn, md) ((uint8_t)((((li) <<
    6) & 0xc0) | (((vn) << 3) & 0x38) | ((md) & 0x7)))
  
  #define LIBNET_ISLOOPBACK(p) (strcmp((p)->ifr_name, 'lo') == 0)
  
  #define LIBNET_ISADVMODE(x) (x & 0x08)
  
  #define LIBNET_LABEL_SIZE 64
  
  #define LIBNET_LABEL_DEFAULT 'cardshark'
  
  #define CQ_LOCK_UNLOCKED (u_int)0x00000000
  
  #define CQ_LOCK_READ (u_int)0x00000001
  
  #define CQ_LOCK_WRITE (u_int)0x00000002
  
  #define for_each_context_in_cq(l) for (l = libnet_cq_head();
    libnet_cq_last(); l = libnet_cq_next())
  
  #define cq_is_wlocked() (l_cqd.cq_lock & CQ_LOCK_WRITE)
  
  #define cq_is_rlocked() (l_cqd.cq_lock & CQ_LOCK_READ)
  
  #define cq_is_locked() (l_cqd.cq_lock & (CQ_LOCK_READ |
    CQ_LOCK_WRITE))
  
  #define check_cq_lock(x) (l_cqd.cq_lock & x)
  
  
Detailed Description¶
libnet macros and symbolic constants
Define Documentation¶
#define for_each_context_in_cq(l) for (l = libnet_cq_head(); libnet_cq_last(); l = libnet_cq_next()) Provides an interface to iterate through the context queue of libnet contexts. Before calling this macro, be sure to set the queue using libnet_cq_head().¶
#define IN6ADDR_ERROR_INIT Value:¶
{ { { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,                                  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,                                  0xff, 0xff } } }
IPv6 error code
#define LIBNET_DO_PAYLOAD(l, p) Value:¶
if (payload_s && !payload)                                                   {                                                                                snprintf(l->err_buf, LIBNET_ERRBUF_SIZE,                                             '%s(): payload inconsistency0, __func__);                          goto bad;                                                                }                                                                            if (payload_s)                                                               {                                                                                n = libnet_pblock_append(l, p, payload, payload_s);                          if (n == (uint32_t) - 1)                                                     {                                                                                goto bad;                                                                }                                                                        }                                                                            .fi
#define LIBNET_DONT_RESOLVE 0 Used for libnet's name resolution functions, specifies that no DNS lookups should be performed and the IP address should be kept in numeric form.¶
#define LIBNET_ERRBUF_SIZE 0x100 The libnet error buffer is 256 bytes long.¶
#define LIBNET_MAX_PACKET 0xffff The biggest an IP packet can be -- 65,535 bytes.¶
#define LIBNET_MAXOPTION_SIZE 0x28 IP and TCP options can be up to 40 bytes long.¶
#define LIBNET_OFF 1 Used several places, to specify 'on' or 'one'¶
#define LIBNET_ON 0 Used several places, to specify 'on' or 'one'¶
#define LIBNET_PR2 0 Used for libnet_get_prand() to specify function disposition¶
#define LIBNET_RESOLVE 1 Used for libnet's name resolution functions, specifies that a DNS lookup can be performed if needed to resolve the IP address to a canonical form.¶
Author¶
Generated automatically by Doxygen for libnet from the source code.
| Thu Mar 29 2012 | Version 1.1 |